Configuring Power Circuit Billing Estimated Reading Time: 5 Minutes The Power Circuit Billing service module bills a client for the power that their power circuits use. At each renewal of the service, Ubersmith gets the power usage of the circuits for the renewal period, in kW hours. Then Ubersmith calculates the amount with the rates of your power seasons. Power circuits are different from PDUs and rebooters. A power circuit is a circuit on a power panel in your facility. To bill for power circuits, do these tasks in this sequence. Each task is described below. Add your power seasons. Add the Power Circuit device module. Set up your power circuit devices. Create a service plan with the Power Circuit Billing module. Add a power circuit service for the client. Associate the power circuit devices with the service. 1. Add your power seasons A power season sets the rate for each hour of the day. Each hour is Off-Peak, Shoulder, or Peak, with a rate for each. A season applies from its Start Date to its End Date, in the months and on the days of the week that you select. Go to Settings > Power Seasons, then click Add Season. Seasons cannot overlap. When you save a season, Ubersmith checks for seasons that conflict with it. For more information, refer to the article "Adding Power Seasons". Your power seasons must cover every hour of the renewal period of the service. If an hour has no season, the renewal fails with the error "Could not find rate for hour …". Make sure that a season covers the current dates. 2. Add the Power Circuit device module Add the Power Circuit device module to the device type of your power circuits, or to its device type group. On the Config tab of the module, select the Appliance that collects the power data. For more information, refer to the articles "Adding Device Group and Device Type Modules" and "Managing Device Group and Device Type Modules". 3. Set up your power circuit devices Each power circuit is a device in Ubersmith: Add a device for the power circuit, with the device type from step 2. Set Parent Device to the power panel that the circuit is on. The power panel device must have the Power Panel device module, so that your appliance collects its data. In the Power Circuit fields of the device, type the Circuit Number of the circuit on the power panel. Ubersmith uses the parent device and the circuit number to get the power usage. You can also type the Breaker, Max Load, and Phase of the circuit, and set its Status. 4. Create a service plan with the Power Circuit Billing module Create a service plan for power circuit billing. For more information, refer to the article "Adding Service Plans". On the Service Plan Details page, in the Service Modules box, click add module. Select Power Circuit Billing, then save the module. 5. Add a power circuit service for the client Add a service for the client with the service plan from step 4. For more information, refer to the article "Adding Services". The service must have these settings: Post Renew: Yes. Ubersmith bills the power after the renewal period ends, when the usage is known. A renewal period, for example monthly. Then set the Power Circuit Billing fields of the service: Field Description Billing Method Select Per-kW Hour. If you select Not Billed, Ubersmith does not bill for power on this service. Off-Peak Multiplier, Shoulder Multiplier, Peak Multiplier Ubersmith multiplies the season rate by this value. If the field is empty, the multiplier is 1. Off-Peak Rate, Shoulder Rate, Peak Rate Ubersmith adds this amount to the rate for each kW hour. If the field is empty, Ubersmith adds 0. Associated Devices Optional. See step 6. For each kW hour, Ubersmith calculates the rate like this: rate = season rate × multiplier + rate of the service For example, if the Peak rate of the season is 0.10, the Peak Multiplier is 1.5, and the Peak Rate is 0.02, each kW hour at peak time costs 0.10 × 1.5 + 0.02 = 0.17. If the service is not set up correctly, the service shows an error, for example "Power Circuit Billing services must be set to post renew." or "Power Circuit Billing services must have a period." 6. Associate the power circuit devices with the service Ubersmith bills the power of the power circuit devices of the service. You can associate the devices in two ways: Assign the devices to the service. If Associated Devices is empty, Ubersmith uses the active devices that are assigned to the service. For more information, refer to the article "Associating Devices with Clients and Services". Type the device IDs in Associated Devices. Separate the device IDs with commas, for example 59,60. To use all of the active devices of the client, type *. To leave out a device, type a minus sign before its ID, for example *,-61. Each device must have the Power Circuit device module. If not, Ubersmith shows "Associated devices must be of type Power Circuit." Check the usage and the amount On the service, the Power Circuit Billing box shows the usage and the amount for the renewal period: In Renewal Period, select Current or Previous. The box shows the Period, the Total Usage in kW hours, and the Total Due. To see a graph of the power usage, click View Graph. At renewal, Ubersmith adds the amount to the invoice. The invoice line shows the usage and the rate for each season and rate type, and the Total Usage.