Ubersmith Docs
Дерево страниц
Перейти к концу метаданных
Переход к началу метаданных

Вы просматриваете старую версию данной страницы. Смотрите текущую версию.

Сравнить с текущим просмотр истории страницы

« Предыдущий Версия 6 Следующий »

Backup billing is available as a service for your clients. Ubersmith displays a chart showing the usage calculated over the current billing period for the service plan. If an overage is calculated at the time of renewal, Ubersmith bills for the overage amount due.

In order to begin billing for this service, you need to configure Ubersmith. Once all the necessary pieces have been configured, any current or new service based on the service plan will be ready. The configuration steps are as follows:

  1. Create a generic bandwidth billing service plan.
  2. Configure your R1Soft device to track backup usage.
  3. Add the Backup Billing service module to your service plan.
  4. Configure the service module and enter the baseline field values.
  5. Create a backup billing service.
  6. Associate your R1Soft device to your service.

 

Configuring the R1Soft Device

Navigate to a device manager entry for a host using the 'R1Soft CDP 3.0 Agent' device module.  Ensure that the R1Soft Agent device is associated with the appropriate client and service so that its data can be used for backup billing calculations.
the R1Soft Agent device is associated with the client ID 1010 and service ID 1087. This is the service ID we will use to configure backup billing. 

Please Note: Any existing or new services you create to manage backup billing must be configured with 'Post Renew' set to 'Yes'. Looking at the service, there are some custom data fields automatically created when the Backup Billing service module was enabled. 
Billing Method
Included
Overage Rate
and
Associated Devices
The Billing Method field determines how you will want Ubersmith to calculate the overage billing. Disk Hours will bill for the actual GB-hours used, so if the client is using 1GB of backup space, they would be billed for 1GB X 30 days X 24 hours, for about 720 GB-hours of usage.
Average Usage bills according to the average over the period, so using the same case, the usage figure would be 1 GB. You can also think of this as charging by GB/month.
95th Percentile is another way of coming up with an average of usage during the month, and pricing is still per GB-month.
Disk Hours is slightly more accurate because it takes into account the varying number of hours month-to-month, but in general calculating Average Usage at $7.20 per GB is the same as Disk Hours at $0.01 per GB-hour.
The Included field determines how much usage the client is permitted for a given billing period.
The Overage Rate determines the dollar amount per unit they will be charged for going over their included allocation.
The Associated Devices field is optional - Ubersmith calculates the usage for any devices associated with the service.


 

Once you've configured these fields, Ubersmith displays a chart showing the usage calculated over the current billing period for the service plan. If an overage is calculated at the time of renewal, Ubersmith will bill for the overage amount due


 

 

Configuring the Service Module

 

  1. In the Overage Precision field, select 0, 1, or 2 to determine how many decimal places to round the amount of space used

  2. In the Error when no devices are associated field, select Yes to receive notification if there is no device to track your client's backups.

     

 

On this page:

On this page:

Related Topics 

Managing Service Plans

R1Soft Enterprise Server and Ubersmith

 

 

  • Нет меток