История страницы

You will first need to add a device type group, as a higher-level category, then add device types to the corresponding groups in which they belong.

Якорь
Access the Device Types page Access the Device Types page

Accessing the Device Types Page

1. From the Ubersmith Dashboard, click Settings. 
   Image Added
   The The Ubersmith Settings page  page appears.Image Removed
2. From the Devices section, click Device Types. 
   Image Added 
   The The Device Types page  page appears.
   Image Removed  

Adding New Device Type Groups

• From the Device Types page, click Add New Device Type Group. The  
  Image Added 
  The Add Device Type Group page  page appears. 

Complete the Details tab

• In the Name field, enter the name of the device type.
  Image Added 

Complete the Custom Fields tab

You define the fields that display in this tab. Any custom field can be defined in the Custom Device Fields page page. The Applicable tab lists all your existing devices so you can assign the custom field to any of them.

1. Click on the Custom Fields tab.
2. For each device, select either Yes, Required, or No.
3. Click Save or Save & New.
   Image Added 

Adding Device Types

• From the Device Types page, click add type. The  
  Image Added 
  The Add Device Type page  page appears. 

Complete the Details tab

1. In the Type Name field, enter the name of the device type.
2. In the Device Type Group field, select a device type group.
3. In the Connection Note Type field, select a connection node.
4. In the Client Visible field, select Yes if you want your clients to view this through the Client Portal, or No if you do not want this visible.
5. In the Block Device Deletion if Connected field, select Yes if you want to prevent the device from being deleted if it has connections, or No if deleting the device with connections is allowed.
   Image Added

Complete the Physical Info tab

1. In the Rackable Device field, select Yes if the device can be installed into a rack or No if the device can not be installed.
2. In the Rack Units field, select the number of rack slots the device will require.
3. In the Width field, type the width of the device then select either inches or feet.
4. In the Depth field, type the depth of the device then select either inches or feet.
5. In the Editable Dimensions field, select Yes if you want to your clients to be able to change the rack units, width, and depth for this device typedimensions for a specific device, or select No if you want the physical information to be view-only.
6. In the Front Image field, click Choose File, navigate to the location of your jpep, png or svg+xml picture, select the image, then click Open.
7. In the Back Image field, click Choose File, navigate to the location of your jpep, png or svg+xml picture, select the image, then click Open.
   Image Added 

Complete the Interfaces Sets tab

This tab automatically creates interfaces based on the device type. You can define the interface type, how many ports/interfaces exist, and what the sequential naming pattern should be.

1. Click Add set.
2. In the Number of interface field, type the total amount of ports or other connection types that exist for the device type.
3. In the Type field, select the type of device.
4. In the Name Pattern field, type the naming pattern that the system should use to automatically create each interface. When creating the interfaces, {num} will be replaced by an incremental number, such as eth0, eth1, eth2, eth{num}-out etc. It can be placed anywhere in the field.
5. In the Private field, select Yes if the interface is not billable, or select No if the interface is billable.
6. In the Prohibit Automated Management field, select Yes if you want to block another management service module from making changes to this device type, or select No to enable another management service module to make changes to this device type.
7. Click Add to add the set
   Image Added 

Complete the Configurable Fields tab

The Configurable Fields tab lists all your existing custom device fields so you can assign them to the device type.

1. For each custom field, select either Yes, Required, No, or Default.
2. Click Save or Save & New.
   Image Added 

Related Topics 

Якорь
Related Topics Related Topics

Managing Custom Device Fields

Adding Device Group and Device Type Modules

Managing Device Group and Device Type Modules

Managing Device Types Groups and Device Types

Ubersmith Device Module Examples